Loading
Rotary tube filling and ultrasonic/hot-air sealing machine for pharmaceutical creams, gels, and ointments in aluminum and plastic/laminate tubes.
Up to 60 tubes/minute across sizes from 5 mL to 250 mL
The TVC-60 Tube Filling Machine automatically feeds empty tubes, orientates print registration marks via color mark sensors, fills pharmaceutical creams or topical gels, and seals tube ends using ultrasonic or hot-air sealing with simultaneous batch code embossing and edge trimming.
| Tube Diameter | 13 mm to 50 mmSource: SAMPLE datasheet — replace with approved datasheet |
|---|---|
| Tube Length | 50 mm to 220 mmSource: SAMPLE datasheet — replace with approved datasheet |
| Dosing Accuracy | ± 0.5%Source: SAMPLE datasheet — replace with approved datasheet |
| Dosing principle | Servo-driven piston pumpsSource: SAMPLE datasheet — replace with approved datasheet |
| Product-contact parts | AISI 316L stainless steelSource: SAMPLE datasheet — replace with approved datasheet |
|---|---|
| Contact surface finish | ≤ 0.4, electropolished µm RaSource: SAMPLE datasheet — replace with approved datasheet |
| Non-contact structure | AISI 304, bead-blasted satin finishSource: SAMPLE datasheet — replace with approved datasheet |
| Elastomers | Silicone / EPDM to FDA 21 CFR 177.2600 and USP Class VISource: SAMPLE datasheet — replace with approved datasheet |
| Nitrogen | 0.2 Nm³/h at 2 bar for headspace purge (option)Source: SAMPLE datasheet — replace with approved datasheet |
|---|---|
| Supply voltage | 415 V ±10%, 3-phase + N + PE, 50 Hz (60 Hz option)Source: SAMPLE datasheet — replace with approved datasheet |
| Compressed air | 6 bar, dry and oil-free to ISO 8573-1 Class 2:4:1Source: SAMPLE datasheet — replace with approved datasheet |
| Control system | PLC with 10-inch colour HMI, recipe management and audit trailSource: SAMPLE datasheet — replace with approved datasheet |
| Overall dimensions (L × W × H) | 3,200 × 1,400 × 2,000 mmSee GA drawing for service clearancesSource: SAMPLE datasheet — replace with approved datasheet |
|---|---|
| Net weight (approx.) | 1,900 kgSource: SAMPLE datasheet — replace with approved datasheet |
| Service clearance | 1,000 mm on operator and maintenance sidesSource: SAMPLE datasheet — replace with approved datasheet |
| Noise level | < 78 dB(A) at 1 mSource: SAMPLE datasheet — replace with approved datasheet |
* Specifications may vary by model. Contact us for exact configuration.
Third-party certification of the quality management system under which every machine in the range is designed, built and tested. It certifies the process, not the performance of an individual machine.
Evidence: ISO 9001:2015 Quality Management System Certificate (PDF · 2 KB)Manufacturer self-declaration that the machine meets the essential health and safety requirements of the Machinery Directive, supported by a technical file and risk assessment to EN ISO 12100.
Evidence: EC Declaration of Conformity Template (Machinery Directive 2006/42/EC) (PDF · 2 KB)World Health Organization guidance on good manufacturing practice, widely used as the reference for export markets and WHO prequalification.
United States current Good Manufacturing Practice regulation for finished pharmaceuticals, including equipment design, cleaning and maintenance requirements (21 CFR 211.63 and 211.67).
US regulation setting the controls under which electronic records and signatures are considered trustworthy and equivalent to paper records.
Evidence: Computerised System Validation & 21 CFR Part 11 Assessment Template (on request)Industry guidance for a risk-based approach to validating GxP computerised systems, used to scope the CSV deliverables supplied with the machine.
All configurations
Confirms that the TVC-60 design, as specified, meets the user requirement specification before manufacture begins.
GMP configurations
Documents that the machine is installed to drawing, connected to the specified utilities and calibrated.
GMP configurations
Challenges the machine across its operating ranges, alarms and interlocks to show it performs as specified.
Customer-executed; product-specific acceptance criteria
Executed by the customer with our support: three production runs with fill volume and closure integrity in limits; media fill support for aseptic lines.
All configurations; customer witnessing optional
Witnessed at our works before dispatch, so defects are corrected where the parts, tools and engineers are.
All configurations
Repeats the critical FAT checks at the customer site after installation and utility connection.
Machines with the PLC/HMI control package
Validation of the PLC/HMI control system to GAMP 5, including the 21 CFR Part 11 controls for electronic records.
| Model | StandardTVC-60 Standard | TVC-60 Aseptic | TVC-60 N2 |
|---|---|---|---|
| Output | Up to 60 tubes/minute across sizes from 5 mL to 250 mL | Up to 60 tubes/minute across sizes from 5 mL to 250 mL; approx. 10% lower with 100% in-process control | Up to 60 tubes/minute across sizes from 5 mL to 250 mL |
| GMP mode | GMP | GMP | GMP |
| Automation level | PLC with 10-inch HMI, recipe management and 21 CFR Part 11 audit trail | PLC with SCADA, 100% IPC weighing and RABS/isolator interlocks | PLC with 10-inch HMI, recipe management and 21 CFR Part 11 audit trail |
| Options |
|
|
|
| Utilities |
|
|
|
| Notes | Not specified | Not specified | For oxygen-sensitive formulations. |
| Part | Part no. | Type | Recommended stock | Replacement interval | Lead time |
|---|---|---|---|---|---|
| Filling needle | GP-LQ-NEED-TVC60-01 | Change part | 1 per nozzle | 12 months | 4 weeks |
| Piston pump seal kit | GP-LQ-PMPS-TVC60-02 | Service kit | 1 kit per pump | 6 months | 3 weeks |
| Silicone product tubing | GP-LQ-TUBE-TVC60-03 | Consumable | 10 m | 3 months | 1 week |
| Star wheel and guide set | GP-LQ-STAR-TVC60-04 | Change part | 1 per container format | Per format change | 6 weeks |
| Capping chuck insert | GP-LQ-CHUK-TVC60-05 | Wear part | 1 per head | 12 months | 3 weeks |
| Container presence sensor | GP-LQ-SENS-TVC60-06 | Electrical | 2 nos | On failure | 2 weeks |
| Sterile vent filter, 0.2 µm | GP-LQ-VFLT-TVC60-07 | Consumable | 2 nos | 6 months or failed integrity test | 2 weeks |
Models, typical specification, utilities and materials of construction for the liquid filling range. Sample content for staging; replace with the approved controlled document before go-live.
Front elevation and plan view with overall dimensions, service clearances and the utility connection schedule. Sample content for staging; replace with the approved controlled document before go-live.
Safety, installation, operation, cleaning, preventive maintenance and troubleshooting for the liquid filling range. Sample content for staging; replace with the approved controlled document before go-live.
Protocol structure, prerequisites, test case tables and acceptance criteria for installation and operational qualification. Sample content for staging; replace with the approved controlled document before go-live.
Document review, mechanical, electrical, functional and performance checks witnessed at our works before dispatch. Sample content for staging; replace with the approved controlled document before go-live.
Installation verification, utility connection, re-test of critical FAT items and production trial at the customer site. Sample content for staging; replace with the approved controlled document before go-live.
GAMP 5 categorisation, 21 CFR Part 11 controls checklist, audit trail review and user access matrix for PLC/HMI control systems. Sample content for staging; replace with the approved controlled document before go-live.
Template declaration issued per machine serial number for CE-marked supply, listing directives and harmonised standards applied. Sample content for staging; replace with the approved controlled document before go-live.
Overview of the full range: capsule filling, tablet compression, blister packing, granulation, coating, washing, liquid filling and utilities. Sample content for staging; replace with the approved controlled document before go-live.
Guide to electronic records, electronic signatures, audit trails and access control on machine control systems. Sample content for staging; replace with the approved controlled document before go-live.
Vial washing, depyrogenation, filling, stoppering and capping systems for sterile liquid lines. Sample content for staging; replace with the approved controlled document before go-live.
Common questions about our pharmaceutical machinery.
Get a custom quote, technical specifications, and delivery timeline from our experts.
